iBase Training

Official Website

Networking CCNA, CCNP, R&S course content by realtime trainers



Module1: Introduction to Networking
 What is Networking?
 Types of Networks (LAN,MAN&WAN)
 Types of Topologies
 Network Protocols
 IP Addressing
 Types of cables
 Crimping / Punching cables
 Functions of Routers, Switches, Bridges and Hubs
 OSI and TCP/IP models
 Data flow between two hosts across a network
 Subnetting (FLSM ,VLSM & CIDR)

Module 2: Introduction to Routers
 What is Router?
 Need of Routers in the real world
 Classification of Routers
 Describe the boot process of Cisco IOS routers
 Configure and verify basic Router configuration
 Configure and verify interface (serial and Ethernet)
 Manage Cisco IOS Files
Boot preferences / Cisco IOS image(s)

Module 3 : Routing Concepts
 Differentiate methods of routing and routing protocols

Static vs. Dynamic
– Link state vs. Distance Vector
Administrative distance
 Configure and verify OSPF (single area)
Benefit of single area
Neighbor adjacencies
OSPF states, Multi area
Configure OSPF v2 & OSPF v3
Router ID, Passive interface, LSA types

 Configure and verify EIGRP (single AS)

Feasible Distance / Feasible Successors
Administrative distance
Feasibility condition
Metric composition
Router ID, Auto summary, Path selection
Load balancing (Equal & Unequal)
Passive interface
 Inter VLAN routing (Router on a stick)
sub interfaces, encapsulation

Configure SVI interfaces

Module 4 : DHCP Service
 Configure and verify DHCP (IOS Router)

Configuring router interfaces to use DHCP
DHCP options
Excluded addresses, Lease time

Module5 :NAT & PAT
 Identify the basic operation of NAT
Purpose, Pool, Static, 1 to 1 & Overloading
Source addressing & One way NAT

Module6 :ACL (Access Control List)
Need of ACL
Types of ACLs
ACL (Types, Features & Applications of ACLs)
– Standard, Extended, Named & Numbered
– Log options

Module7 :LAN Switching
 Identify basic switching concepts
Types of Switching
Collision / Broadcast Domains
CAM Table

 Configure and verify initial switch configuration
 Switch operation (ping, telnet and ssh)
 Identify enhanced switching technologies

Ether channels

 Configure and verify VLANs / Trunking
DTP / Auto negotiation
 Configure and verify PVSTP operation
Root bridge election / STP Modes

Module8 : High Availability
 Redundancy Protocols
 Types of Redundancy Protocols
 Configuring & Verifying Redundancy Protocols

Module9 : Network Device Security
 Configure and verify network device security
Enable secret
Disable telnet
Physical security
Service password
 Configure and verify Switch Port Security
Sticky MAC / MAC address limitation
Static / dynamic
Violation modes(Err disable/Shutdown)
Protect restrict
Err disable recovery
 Configure and verify NTP as a client
 Configure and verify Syslog.
 Describe SNMP v2 & v3

Module10 :IP V6 Addressing
 Private and public IP addresses for IPv4
 IPv6 addressing scheme
 IPv4 addressing scheme using VLSM and summarization
 IPv6 in conjunction with IPv4 such as (dual stack)
 Describe IPv6 addresses
Global unicast
Link local
Unique local
auto configuration

Module11 : WAN Technologies
 Identify different WAN Technologies
Metro Ethernet, VSAT, Cellular 3G & 4G
ISDN, DSL, Frame relay, MPLS, VPN & Cable
 Configure and verify Frame Relay on Cisco routers

Moule12 : Troubleshooting
 Identify and correct common network problems
o Utilize netflow data
 Troubleshoot and Resolve VLAN problems
 Troubleshoot and Resolve trunking problems
 Troubleshoot and Resolve STP
 Troubleshoot and Resolve routing issues
 Troubleshoot and Resolve OSPF problems
 Troubleshoot and Resolve EIGRP problems
 Troubleshoot and Resolve interVLAN
 Troubleshoot and Resolve ACL issues
 Troubleshoot and Resolve WAN implementation issues


Student Registration


Email Id

Country Code

Mobile No

Course Name